Paradox
Availability: Stock exhausted
PARADOX HV8D - 8-channel module to control the motors
• PARADOX HV8D - 8-channel module to control motors
• 8 relay outputs for control of high voltage (110/240V, 10A resistive load)
• Control of bikes to 1/2hp (max. 8A)
• 2 modes: mode and relay mode relay closure
• relay output mode:
- Control of eight high-voltage devices
• Mode switch:
- Output control pairs of 4 plug for up / down
- Built-in calibration time for opening / closing
- Emergency stop
- Global control up / down for all related plug
• Connects to multibas bus with 4-wire 13.8Vdc encrypted communication link speeds 500bps
• Firmware upgradeable via Multibus RS-485 at 57.6Kbps
• Programming of the module is done through BabyWare PC software
• DIN rail terminals with fast, secure, orderly and economical installation
• Supports 35 mm DIN rail mounting rail
• 8 integrated buttons for manual control of each output (backlight display condition)
• 3-LED diodes for status display module
• Labels to identify the outputs
Availability: Stock exhausted
• PARADOX HV8D - 8-channel module to control motors
• 8 relay outputs for control of high voltage (110/240V, 10A resistive load)
• Control of bikes to 1/2hp (max. 8A)
• 2 modes: mode and relay mode relay closure
• relay output mode:
- Control of eight high-voltage devices
• Mode switch:
- Output control pairs of 4 plug for up / down
- Built-in calibration time for opening / closing
- Emergency stop
- Global control up / down for all related plug
• Connects to multibas bus with 4-wire 13.8Vdc encrypted communication link speeds 500bps
• Firmware upgradeable via Multibus RS-485 at 57.6Kbps
• Programming of the module is done through BabyWare PC software
• DIN rail terminals with fast, secure, orderly and economical installation
• Supports 35 mm DIN rail mounting rail
• 8 integrated buttons for manual control of each output (backlight display condition)
• 3-LED diodes for status display module
• Labels to identify the outputs
• Last Updated: 04.07.2012 15:07
• 8 relay outputs for control of high voltage (110/240V, 10A resistive load)
• Control of bikes to 1/2hp (max. 8A)
• 2 modes: mode and relay mode relay closure
• relay output mode:
- Control of eight high-voltage devices
• Mode switch:
- Output control pairs of 4 plug for up / down
- Built-in calibration time for opening / closing
- Emergency stop
- Global control up / down for all related plug
• Connects to multibas bus with 4-wire 13.8Vdc encrypted communication link speeds 500bps
• Firmware upgradeable via Multibus RS-485 at 57.6Kbps
• Programming of the module is done through BabyWare PC software
• DIN rail terminals with fast, secure, orderly and economical installation
• Supports 35 mm DIN rail mounting rail
• 8 integrated buttons for manual control of each output (backlight display condition)
• 3-LED diodes for status display module
• Labels to identify the outputs
• Last Updated: 04.07.2012 15:07
